Skip to main content

All locations

Please select your country & language

China | 中国
Germany | Deutschland

Your country is not in the list?

Go to our international website:

Mersen EP International website
Country / Language:  USA / English
Contact us

IEEE Codes and Standards

IEEE Codes and Standards

IEEE C62.41.1, “Guide on the Surge Environment in Low-Voltage (1000 V and less) AC Power Circuits”
This guide, the first in the trilogy, provides readers with comprehensive information on surges, the environment in which they occur and is a reference for the second document of the trilogy.

IEEE C62.41.2, “Recommended Practice on characterization of Surges in Low-Voltage (1000 V and less) AC Power Circuits”
This guide, the second in the trilogy, presents recommendations on the selection of surge waveforms, amplitudes of surge voltages and currents used to evaluate equipment immunity and performance of SPDs. Two recommended “standard” waveforms are used as a simplified representation of the surge environment:

IEEE C62.45, “Recommended Practice on Surge Testing for Equipment Connected to Low-Voltage (1000 V and Less) AC Power Circuits.”
This guide, the third in the trilogy, focuses on surge testing procedures (using simplified waveform representations) for obtaining reliable measurements and enhancing operator safety. The intent is to provide background that can help determine whether equipment or a circuit has adequate ‘withstand’ capability. Signal and data lines are not addressed in this document.

The document does not indicate withstand levels that might be assigned to specific equipment. An important objective of the document is to call attention to the safety aspects of surge testing. Underwriters Laboratories, Inc. uses these guidelines as a reference in their performance and safety testing.

In addition, IEEE has produced the following standards for the application and testing of SPDs.

  • C62.11 Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV)
  • C62.36  Standard Test Methods for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling Circuits
  • C62.41.3  Guide on Interactions between Power System Disturbances and Surge-Protective Devices
  • C62.41.4  Recommended Practice on Surge Testing for Equipment Connected to Low-Voltage (1000V and Less) AC Power Circuits
  • C62.42 Guide for the Application of Component Surge-Protective Devices for Use in Low-Voltage [Equal to Or Less Than 1000 V (ac) Or 1200 V (dc)] Circuits
  • C62.43 Application of Surge Protectors Used in Low-Voltage (Equal to or Less than 1000 V rms, or 1200 V DC) Data, Communications, and Signaling Circuits
  • C62.44 Guide for the Application of Low-Voltage (1000 V rms or Less) Surge Protective Devices Used on Secondary Distribution Systems (Between the Transformer Low-Voltage Terminals and the Line Side of the Service Equipment)
  • C62.50 Standard for Performance Criteria and Test Methods for Plug-in (Portable) Multiservice (Multiport) Surge-Protective Devices for Equipment Connected to a 120/240 V Single Phase Power Service and metallic conductive communication line(s).
  • C62.62 Test Specifications for Surge Protective Devices for Low Voltage AC Power Circuits 
  • C62.64 Standard Specifications for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling Circuits
  • C62.72 Guide for the Application of Surge-Protective Devices for Low-Voltage (1000 V or Less) AC Power Circuits
  • 1100 -  IEEE Recommended Practice for Powering and Grounding Electronic Equipment
  • 1159 - IEEE Recommended Practice for Monitoring Electric Power Quality
  • 1547- IEEE Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces
  • 1692- IEEE Guide for the Protection of Communications Installations from Lightning Effects
  • IEEE Emerald Book